USING A TV MODULATOR
If you do not have a spare scart socket, you will need to purchase a CT210 TV
Modulator (available from your distributor or from the Voltek helpline) which will
connect the CT105 to the aerial input of your TV or VCR.
Please consult the instructions provided with the TV Modulator for connection
details and how to view the camera picture.
MULTIPLE CAMERA INSTALLATION
There are two methods in which more than one camera may be used.
CT200 Four Camera Switcher
This accessory will allow up to four cameras to be connected to the scart input of
your TV or VCR. The screen will automatically switch from one camera to the next
every few seconds and the user can also manually choose the camera to be
viewed.
CT210 TV Modulator
In this method, each camera will require a TV Modulator The TV or VCR can then
be tuned-in to the relevant camera frequencies. To view the camera pictures,
simply press the appropriate button on your remote control. e.g. press channel 6
to view camera 1, press channel 7 to view camera 2, etc.
Please note that only one camera picture at a time can be recorded on your VCR
when connected in this method.
CONNECTING TO A VCR
To record the camera pictures, the camera should be connected to the VCR as
shown.
Page 3
INSTALLING THE CAMERA
POSITIONING THE CAMERA
The CT105 Camera is suitable for indoor or outdoor use. Please bear in mind the
following points when choosing a suitable position.
The camera must be positioned so that it will not point directly into the sun (sunrise
or sunset) or any very bright light. This may cause damage to the camera.
The best viewing angle is achieved when mounted at approx 3 to 4 metres high,
with the camera pointing downwards.
Avoid viewing areas where half the area is in bright sunlight and the other half is
dark, such as in the shadow of a building. All types of cameras have difficulty in
‘seeing’ with such a large lux level variation.
Bear in mind not to position the camera too far away from the door entrances as
you may not be able to hear any speech or sound.
IR illumination will work for approximately 3 Metres distance. If you require viewing
of a large area ensure a light is fitted near to the camera for night-time operation.
The camera cable supplied may be extended up to approximately 100 metres.
COMPLETING THE INSTALLATION
The camera can either be attached to a vertical wall, or placed on a table top using
the optional bracket. Before final installation be sure to check the camera picture
on the televison to enure it is covering the desired area.
HOW TO VIEW THE CAMERA
If the camera is connected to the scart socket of your TV or VCR, simply select the
scart channel by pressing the appropriate button on your remote control. (there is
no need to do any tuning)
Page 4
