Installation
Instructions
1805
RS1 Remote Sounder
Thankyou for purchasing the RS1 Remote Sounder. Please read these
instructions carefully before starting the installation.
•
Audible & Visual indication of
detection by a PIR sensor for one
zone of lighting.
•
Internal sounder bleeps whenever
movement is detected.
•
Touch sensitive buttons.
•
12V dc 3-wire connection.
•
Multiple RS1 Remote Sounders’
can be connected together 24
hour operation.
Sounder On/Off
Indicator
Movement
Sounder On/Off
RS1
SECURILITE
Button
Indicator
Sounder
Aperture
The unit may be installed at any suitable indoor location where the device will
not be subject to excessive heat or moisture.
1. Pull the lid off the back part of the enclosure using your fingers.
2. Fix the back part of the enclosure to the chosen surface.
3. Run a 4 core alarm cable from the Securilite mains control unit to the
RS1
Remote Sounder
and connect as shown over.
+
_
S
R
+
_
S
1805
RS1 Remote Sounder
Securilite Mains Control Board
1800, 1802, 1803 or 1817
4. Push the front enclosure back into position carefully.
5. Connect any other devices to the system following the instructions supplied
with the individual units.
Sounder On/Off Button - This will either arm or disarm the internal sounder.
With the sounder on, it will activate whenever movement is sensed by a PIR
detector, day or night.
Sounder On/Off Indicator - While this is illuminated, the sounder is ready to
activate whenever a PIR detector senses movement. With the indicator off,
the sounder is also off.
Operating voltage 12V dc
Current consumption 20mA
Operating temperature 5
°
C to +40
°
C
Weatherproofing IP30 (Indoor use only)
Dimensions 85mm(W) x 65mm(H) x 20mm(D)
Package weight 0.07Kg
Approvals CE directive 93/68/EEC
EMC directive 89/336/EEC,
BS EN 50081-1 : 1992, BS EN 50082-1 : 1992
39c Churchill Way, Lomeshaye Ind. Est., Nelson. Lancs. BB9 6RT (UK)
Tel (01282) 695500 Fax (01282) 695511 International Code ( + 44 1282)
Email : Sales@voltek.co.uk Website : www.voltek.co.uk
©
Voltek Automation Ltd. 1995-2006 Issue 5 DWB
FEATURES
SITING THE UNIT
INSTALLATION
UNIT OPERATION
SPECIFICATION
