Intrinsically Safe Detection
The Voltek range of Intrinsically Safe Detection products are designed for use in hazardous environments such as petrochemical, gas plants, explosive manufacturing / storage, pharmaceutical and mining industries. Apart from the security applications the products may also be used for other applications such as safety, lighting, and any environment where sensing or movement detection is a prerequisite. All installers of intrinsically safe equipment should be familiar with the installation instructions provided by nationally accepted codes of practice i.e. EN60079-16 (Section 12) for Europe
All prices shown are EXCLUDING VAT.
| All sub-categories... | |
| Detectors | Zone Interface Units |
| Door Contact Interfaces |
All products...
 |
Intrinsically Safe PIR Detector IS2000 Intrinsically safe PIR with 15m x 90 degree detection range. Designed and manufactrued to very stringent standards that allow their use in Zone 0, 1 and 2 areas. Must be used with a ZE Interface. |
|
|
 |
Interface for 1 x IS2000 ZE1-1 Provides an approved and easy method of connecting 1 x IS2000 PIR sensor to the outside world. Contains the correct zenner barrier to ensure no dangerous voltage or current enters the hazardous area. |
|
|
|
Interface for 2 x IS2000 ZE1-2 Similar specification to the ZE1-1 but this unit allows connection to 2 x IS2000 PIR Sensors. Also has individual outputs for each sensor |
|
|
|
Interface for 3 x IS2000 ZE1-3 Similar specification to the ZE1-1 but this unit allows connection to 3 x IS2000 PIR Sensors. Also has individual outputs for each sensor |
|
|
|
Interface for 4 x IS2000 ZE2-4 Similar specification to the ZE1-1 but this unit allows connection to 4 x IS2000 PIR Sensors. Also has individual outputs for each sensor |
|
|
|
Interface for 5 x IS2000 ZE2-5 Similar specification to the ZE1-1 but this unit allows connection to 5 x IS2000 PIR Sensors. Also has individual outputs for each sensor |
|
|
|
Interface for 6 x IS2000 ZE2-6 Similar specification to the ZE1-1 but this unit allows connection to 6 x IS2000 PIR Sensors. Also has individual outputs for each sensor |
|
|
 |
One Channel Door Contact Interface DCI-1 Allows a normal magnetic door contact (that contains no electrical components) to be used in a hazardous area. |
|
|
|
Two Channel Door Contact Interface DCI-2 Similar specification to the DCI-1 but this unit has 2 channels |
|
|
|
Three Channel Door Contact Interface DCI-3 Similar specification to the DCI-1 but this unit has 3 channels |
|
|
|
Four Channel Door Contact Interface DCI-4 Similar specification to the DCI-1 but this unit has 4 channels |
|
|
|
Five Channel Door Contact Interface DCI-5 Similar specification to the DCI-1 but this unit has 5 channels |
|
|
|
Six Channel Door Contact Interface DCI-6 Similar specification to the DCI-1 but this unit has 6 channels |
|
|
- Ex-Demo Products
- Wireless Cameras
- Domestic Cameras
- Spectrum Cameras
- B&W Cameras
- Colour Cameras
- Day Night Cameras
- Night Vision Cameras
- Movement Detection Cameras
- Covert Cameras
- Bullet Cameras
- Dome Cameras
- Body Cameras
- Audio/Video Modules
- Digital Video Recorders (DVRs)
- Computer Based CCTV
- Multiple Camera Kits
- CCTV Accessories
- Monitors
- Intruder Alarms
- Security Lighting Products
- Energy Management Products
- Intrinsically Safe Detection
- Computer Products
- SPECIAL OFFERS
- NEW PRODUCTS